HOME   KTM   Vehicles   Contact/ About    Copyright ReadMe    Site Map    Davies Family Photos 

 

Custom Search

RAV4 - V6 Oil Filter Tool

  The new NAPA (KD Tools) filter wrench P/N 3860. This is a resin, combination 65 mm/ 67 mm wrench, with a steel insert in the drive hole. (Beware of cheaper tools with no insert - they can break.) The extra 67 mm section does not allow the tool to slide onto the filter housing far enough to properly engage the 65 mm flats. To fix this problem use a hacksaw to cut off about 5/16 to 3/8 inch of the tool. File the cut area flat to remove burrs.

  The modified tool on the filter housing, with the cut off piece next to it.

 

RAV4 Page Updated March 04, 2007


return to John Davies' Vehicles Index